Here is a really easy project that looks so much more complicated than it is. As a plus, it’s very economical. The hugs and kisses mold is only $2.50 and you can use any plain mold for embedding (we used our rectangle tray mold). The materials to make these soaps work out to be just $1.28 per bar (not including the molds) and you can even make them for less if you make more than 8 bars of soap and soap in bulk.
Here are the ingredients we used:
Clear M&P Base and White M&P Base
Violet Fragrance Oil
Luster Black Mica & Merlot Mica
Rectangle Tray Mold (but any plain mold will do)
Hugs & Kisses Mold
You can use scraps from our last Valentine soap project, or you can make them from scratch using:
Non-bleeding liquid colorant
Tools:
microwave safe containers (we like to use a pyrex measuring cup)
Dropper
spray bottle of rubbing alcohol
1. Start with your Hugs and Kisses mold and make the embeds. We used white melt and pour for the X and O’s and Clear for the lips. You can use which ever you chose, but remember white melt and pour will make black go gray and reds go pink. Bright vibrant colors need clear soap.
2. Next create the soap confetti for the background. If you have left over scrap melt and pour, preferably in non-bleeding pinks or red this is a perfect chance to use them. If not then mix up a batch or two (depending on how many colors you want) using white melt and pour and a non-bleedig color. Pour these into anything that is flexible that you can release. We will be cutting them up into little chunks, so the mold you use and how pretty the soap is does not matter at all. Let these set and harden. You want the soap fresh and pliable so do not put in fridge/freezer. Cut this soap up into little pieces.
3. Now all the pieces are made and we can start assembling the soaps. Think of how you want the embeds to be laid out. You do not want the X’s and O’s to be cut once the soap is finished. If you’re using the Rectangle Tray Mold, stay inside the score marks of the mold. Once we start putting the embedded soaps in there will not be much time to change or move them around, so pre-planning is essential!
4. Melt 1 pound of clear melt & Pour base and fragrance with 1/4 ounce of fragrance. Pour about half of the scented clear melt & pour soap into the rectangle tray mold. We poured until the soap just reached the top of the indented rectangle marks. Spray with alcohol.
5. Working quickly, spray your embeds generously with the alcohol and place them where you want in the mold. Remember, we want the pretty sides to go face down especially with the lips – the detailed front of the lips need to face down.
6. Let these set a minute or two until the clear has hardened or has a thick skin. Then spray with alcohol and pour the rest of the clear – it should come just high enough to cover the embeds.
7. Once that layer has set you can get the little scraps of soap that we cut up in the first step. Spray these with alcohol and sprinkle them evenly over the soap. Ignore the score marks this time… spread evenly everywhere.
8. Finally melt 1/2 pound white soap base and add 1/8 oz. fragrance. Spray the soap layer in the mold with alcohol again and then immediately pour carefully over the scraps, filling the mold to the top. You need to pour slowly, evenly and close to the soap or the force of the pour will move around your scraps. The ideal temperature to pour with the Bramble Berry house melt and pour bases is around 125 to 130 degrees. If your soap is steaming or is so warm that you can’t put your finger in it, the soap is too hot and will melt the pink little chips. It’s a cute look but won’t get you the soap pictured in the top picture.
9. Wait 4 to 6 hours for the soap to fully harden before carefully popping out and cutting your perfectly lovely Valentine’s inspired bars.
Voila! adorable soaps perfect for Valentine giving.