Melt and pour soap is a great option for crisp and clean layers. This Cinnamon Cocoa Soap tutorial shows you how to create a brown and white design that’s topped with a bit of cocoa powder.
Ingredients
10″ Silicone Loaf Mold
30 oz. White Melt and Pour Soap Base
20 oz. Honey Melt and Pour Soap Base
0.8 oz. Cinnamon Cocoa Fragrance Oil
0.8 oz. Vanilla Color Stabilizer
Brown Oxide Color Block
Cocoa Powder
99% Isopropyl Alcohol in a Spray Bottle
Optional: Crinkle Cutter
Instructions
Chop 30 ounces of White Melt and Pour Soap Base into small uniform pieces. Place the soap into a heat-safe container. Chop 20 ounces of Honey Melt and Pour Soap Base and place into a separate heat-safe container.
Place the container of white soap into the microwave and melt using 30-60 second bursts. Add 0.4 ounces of Cinnamon Cocoa Fragrance Oil and 0.4 ounces of Vanilla Color Stabilizer. Use a spoon to thoroughly mix in.
To make each layer exactly the same size, place the mold on a scale and pour 10 ounces of white soap into the mold. Spritz the soap with 99% isopropyl alcohol to get rid of bubbles. Allow the layer to harden and cool for about 20-30 minutes so it can support the next layer.
Once the white layer has cooled and hardened, melt the 20 ounces of Honey Melt and Pour Soap Base in the microwave using 30-60 second bursts. Add chunks of the Brown Oxide Color Block to the melted soap and stir until you have a rich brown color.
Add 0.4 ounces of Cinnamon Cocoa Fragrance Oil and 0.4 ounces of Vanilla Color Stabilizer. Stir in thoroughly. Allow the soap to cool to 125-130° F so it doesn’t melt the soap below. NOTE: While this soap is already brown, the Vanilla Color Stabilizer prevents the vanilla discoloration from bleeding into the white layers.
Spritz the white layer with 99% isopropyl alcohol and place the mold onto a scale. Pour 10 ounces of the brown soap into the mold and spritz with alcohol to get rid of bubbles. Allow the soap to cool for 20-30 minutes.
Remelt the white soap using 20-30 second bursts and allow it to cool to 125-130° F. Spritz the bottom layer with 99% isopropyl alcohol and pour 10 ounces of white soap into the mold. Spritz the soap with alcohol to get rid of bubbles. Allow this layer to cool and harden for 20-30 minutes.
Remelt the remaining brown soap using 10-20 second bursts and allow it to cool to about 125-130° F. Spritz the soap in the mold with 99% isopropyl alcohol and pour the remaining brown soap into the mold. Spritz with alcohol to get rid of bubbles and allow it to cool and harden for 20-30 minutes.
Remelt the remaining white soap using 10-20 second bursts and allow it to cool to about 125-130° F. Spritz the soap in the mold with 99% isopropyl alcohol and pour the remaining white soap into the mold. Spritz with alcohol to get rid of bubbles.
Place a small amount of cocoa powder into a sifter – we used the Powder Duster. Gently tap the sifter to dust the top of the soap with cocoa powder. Once you’re happy with the look, allow the soap to fully cool and harden for about 4 hours or overnight.
Remove the soap from the mold. Cut the soap into bars with either a non-serrated knife or a crinkle cutter. Which you use just depends on what look you prefer. The non-serrated knife shows off crisp layers, while the crinkle cutter gives extra detail. To prevent glycerin dew, wrap the soap in plastic wrap. Enjoy!
Recipe by Soap Queen at https://www.soapqueen.com/bath-and-body-tutorials/melt-and-pour-soap/cinnamon-cocoa-melt-pour-soap/