Chocolate Peppermint Soap Cupcakes Tutorial
Author: 
Recipe type: Cold Process Soap
Cook time: 
Total time: 
Serves: 6 cupcakes
 
These soap cupcakes are inspired by the classic combination of chocolate and mint.
Ingredients
Sphere Embeds
  • Small 9 Ball Silicone Mold
  • 3 oz. LCP Clear Melt & Pour Soap Base
  • Red Mica
Base
  • Round Cupcake Silicone Mold
  • 33 oz. Basic Quick Mix
  • 4.7 oz. Sodium Hydroxide Lye
  • 10.9 oz. Distilled Water
  • 1 oz. Dark Rich Chocolate Fragrance Oil
  • Brown Oxide
Frosting
  • Disposable Frosting Bag
  • 1M Frosting Tip
  • 1 oz. Moroccan Mint Fragrance Oil
  • 4 oz. LCP Clear Melt & Pour Soap Base
  • Brown Oxide Color Block
  • Cranberry Seeds
Instructions
MAKE THE EMBEDS: Chop and melt 3 oz. of LCP Clear Melt & Pour Soap Base in the microwave using 10 second bursts. Because you’re melting such a small amount of soap, use short bursts so it doesn’t burn. Add a dash of the Red Mica and use a spoon to thoroughly mix it in. Add more mica if you’d like a more saturated color. Pour the soap into each cavity of the Small 9 Ball Silicone Mold and allow to cool and harden. While the embeds cool, prep the other ingredients.
COLOR PREP: Disperse 1 teaspoon of brown oxide into 1 tablespoon of lightweight liquid oil (like sunflower oil or sweet almond). Use a mini mixer to work out any clumps.
FRAGRANCE PREP: Measure 1 ounce of Dark Rich Chocolate Fragrance Oil and 1 ounce of Moroccan Mint Fragrance Oil into separate glass containers. Set them aside.
MELT & POUR PREP: Chop about 4 ounces of LCP Clear Melt and Pour Soap Base into small chunks and place in a heat-safe container. Add a chunk of the Brown Oxide Color Block. Do not melt yet, this soap will be drizzled on top of the frosting in a later step.
SAFETY FIRST: Suit up for safe handling practices. That means goggles, gloves, and long sleeves. Make sure kids, pets, other distractions, and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.
  1. Slowly and carefully add the lye to the water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool. If you prefer a harder bar of soap that releases faster from the mold, you can add sodium lactate to the cooled lye water. Use 1 teaspoon of sodium lactate per pound of oils in the recipe. For this recipe, you’d add 2 teaspoons of sodium lactate.
  2. Fully melt the entire bag of Basic Quick Mix until it’s completely clear and there is no cloudiness. Shake the bag to mix up all the oils. Measure 33 ounces into your soaping bowl. Once the lye water and the oils have cooled to 130 degrees F or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend the mixture to a thin trace.
  3. Split off 21 ounces of the soap batter into a separate container.
  4. To this container of soap, add 2 teaspoons of dispersed Brown Oxide. Then add the Dark Rich Chocolate Fragrance Oil. Use a whisk to mix in the colorants and fragrance. If you still have a thin trace, use the stick blender to thicken the batter to a medium trace.
  5. Pour the brown soap into the cavities of the Cupcake Silicone Mold. Use a spoon to even out the soap, but don’t worry about them being perfect. They will soon be covered in soap frosting.
  6. Add the Moroccan Mint Fragrance Oil to the remaining soap batter, and use a stick blender to mix it in. If the soap is a thin to medium trace, continue stick blending until it is a thick trace. It needs to be thin enough so it’s pipeable but firm enough to hold its shape. If it’s not thickening with the stick blender, let the soap sit in the bowl for 1-2 minutes and test the texture. Continue to let it firm up until you’ve reached the texture of very thick pudding. Spoon some of the soap into the frosting bag. Twist the end of the bag to close it. It’s time to pipe.
  7. Squeeze a large dollop of frosting in the center of each cupcake.
  8. Pipe the frosting up and around the center of each dollop until you form a peak. Continue until each cupcake is frosted. If you have leftover soap frosting, pipe little flowers on freezer paper to use as toppers for another batch.
  9. Once the cupcakes are frosted, melt the LCP Soap Base in the microwave using 5 second bursts. Once melted, use a dropper or spoon to drizzle the melted soap on top of one cupcake.
  10. Quickly, while the melt and pour is still wet, sprinkle cranberry seeds on top. Spritz with alcohol to get rid of bubbles if necessary and place a red embed on the top of each cupcake.
  11. Continue this process for each cupcake. Once each of the cupcakes are decorated, spritz them all with more alcohol to help prevent soda ash. If you live in a hot climate, you may want to place the cupcakes in the fridge for several hours to prevent the frosting from melting and losing its shape. Our area was cool, so we let the cupcakes sit at room temperature.
  12. Allow the cupcakes to stay in the mold for 2-3 days. Carefully remove each soap from the mold, and allow to cure for 4-6 weeks. Enjoy.
Recipe by Soap Queen at https://www.soapqueen.com/bath-and-body-tutorials/chocolate-peppermint-soap-cupcakes-tutorial/