These cute melt and pour soaps look just like a blueberry tart!
Ingredients
Round (Cupcake) Silicone Mold
2 Small 9 Ball Silicone Mold
5 oz. Clear Melt and Pour Soap Base
21 oz. White Melt and Pour Soap Base
0.6 oz. Blueberry Jam Fragrance Oil
Ultramarine Blue Color Block
Brown Oxide Color Block
Droppers
Instructions
Cut 5 oz. of Clear Melt and Pour Soap into small, even pieces. Place the soap in a heat-safe container and melt on 5 second bursts. Using short bursts prevents the soap from burning. Add shavings of the Ultramarine Blue Oxide Color Block until the soap is a rich blueberry color. Add 3 mL of Blueberry Jam Fragrance Oil and stir to fully incorporate. Pour the soap into the Small 9 Ball Silicone Molds and spritz with 99% isopropyl alcoholto pop any bubbles. You will have about 1.4 ounces of soap leftover to drizzle on top of each bar. Let the embeds fully harden and cool. This will take about 30 minutes to 2 hours. When they’re ready, unmold by pushing on the back of each cavity.
Chop 21 oz. of White Melt and Pour into small, even pieces. In a small heat-safe container, measure out 3 ounces of the white soap and melt on 5 second bursts. Add shavings of the Brown Oxide Color Block until you have a medium brown shade. Pour .5 ounces of soap into each cavity of the Round Silicone Cupcake Mold and spritz with alcohol to disperse any bubbles. You can place the mold on a scale to measure out the .5 ounces of soap, or just eyeball it.
While the brown layer hardens, add the remaining 18 oz. of White Melt and Pour Soap to a large heat-safe container and melt on 30-second bursts. Add 0.5 ounces of Blueberrry Jam Fragrance Oil and stir to fully incorporate. When the brown soap is hard and the white soap is 125-130 ° F (cool enough not to melt the brown soap), you’re ready to pour. Spritz the brown soap with alcohol so the layers stick, and pour the white soap on top. Leave about ½ inch of space in each cavity. This will be a third layer that will hold the blueberry embeds in place. Let the white layer harden, which will take 30 minutes to 2 hours.
Reheat the remaining white soap on 10 second bursts. Spritz the top of the soap and the blueberry embeds with alcohol. Place three embeds on top of each bar. Then, slowly and carefully pour the white soap in until the cavity is full. Spritz with alcohol to disperse any bubbles. Let the soap fully cool and harden, which will take about an hour.
Then, unmold by pressing the bottom of each cavity. Reheat the remaining blue soap on 5 second bursts. Spritz the top of the soap with alcohol and drizzle the blue soap on using a dropper. Then, spritz with alcohol again to pop any bubbles. There is no right or wrong way to do this, so have fun! Let the top harden for about 30 minutes and then enjoy! To avoid glycerin dew, wrap them immediately in plastic wrap, or another airtight packaging option.
Recipe by Soap Queen at https://www.soapqueen.com/bath-and-body-tutorials/melt-and-pour-soap/blueberry-tart-melt-pour-soap-diy/