These cute guest sized Lemon Goat Milk Melt and Pour Bars are full of lemon peel and lemon essential oil.
Ingredients
Guest Goat Milk Tray Mold
28 oz. Goat Milk Melt & Pour Base
10 mL Lemon Essential Oil
1.5 tsp. Lemon Peel
Yellow Oxide Color Block
Optional: Clean Up Tool, Droppers, 99% Isopropyl Alcohol
Instructions
Chop and melt 2 oz. of Goat Milk Melt & Pour base in the microwave using 10 second bursts. Because you are melting such a small amount of soap, using short bursts prevents the soap from scorching. Add shavings of the Yellow Oxide Color Block until a rich yellow color is achieved.
Spray the mold with a thin layer of 99% isopropyl alcohol. Using a dropper, drop the yellow soap into the lettering and border detail. Spraying the mold with alcohol beforehand helps the soap spread easily into the letters and borders. Spritz the top with alcohol to disperse any bubbles. Allow to fully cool and harden. If necessary, use a Clean Up Tool to clean up any soap that has spread out of the detailing.
Chop and melt 26 oz. of Goat Milk Melt & Pour Base in the microwave using 30 second bursts. Once melted, add 10 mL of Lemon Essential Oil and use a spoon or spatula to fully mix in.
Disperse 1.5 tsp. of Lemon Peel Powder into 1 Tbs. 99% isopropyl alcohol. Add to soap and use a spoon or spatula to fully mix in. Dispersing the powder helps avoid clumps.
Once the soap has reached a temperature of 120-125°F, spritz the yellow soap with 99% alcohol then pour. Don’t pour the soap if it’s above 125°F, or it may melt the yellow details.
Pour the soap into the mold, and spritz the top with 99% alcohol to disperse any bubbles. Allow to fully cool and harden.
Once cooled, remove from the mold and use a sharp knife to cut into bars along the scored lines. Enjoy!
Recipe by Soap Queen at https://www.soapqueen.com/bath-and-body-tutorials/melt-and-pour-soap/lemon-goat-milk-melt-pour-bars/