These gingerbread man soaps feature fun colors for a unique twist.
Ingredients
Gingerbread Man Mold
12.5 oz. Goat Milk Melt and Pour
7.5 oz. Clear Melt and Pour
Fizzy Lemonade Colorant
Neon Blue Raspberry Colorant
Liquid Yellow
Liquid Blue
Liquid Red Oxide
Liquid Non-Bleeding Cherry
Liquid Black Iron Oxide
Liquid Non-Bleeding Teal
Liquid Green Oxide
Liquid Glycerin
.15 CC Mini Scoop (1 scoop)
5 mL Almond Cybilla Fragrance Oil
5 mL Cinnamon Sugar Fragrance Oil
10 mL Vanilla Color Stabilizer
Box Template for Gingerbread Man
Instructions
COLOR PREP: In a small container, add ten .15 CC mini scoops of Fizzy Lemonade Colorant and ½ tsp. liquid glycerin. Use a mini mixer to remove any clumps. In a separate container, disperse four .15 CC mini scoops of Neon Blue Raspberry into 1 tsp. of 99% isopropyl or rubbing alcohol. Use a mini mixer to remove any clumps, and set both colors aside.
In a large heat safe container, cut and melt 12.5 oz goat milk melt and pour base in the microwave using 15 second bursts, stirring in between each burst. In a separate container, melt 7.5 oz. clear melt and pour base in the microwave using 10 second bursts, stirring in between each burst.
To the clear melt and pour, add 2 mL Almond Fragrance Oil, 2 mL Cinnamon Sugar Fragrance Oil and 4 mL Vanilla Color Stabilizer. Stir to combine. To the goat milk melt and pour, add 3 mL Almond Fragrance Oil, 3 mL Cinnamon Suagr Fragrance Oil and 6 mL Vanilla Color Stabilizer. Stir to thoroughly combine.
Split the goat milk and clear melt and pour bases into four separate heat safe containers, using the following amounts. The reason for splitting the goat milk and clear soap bases into various ratios is to obtain the right colors. The containers with more clear soap will later be the darker colors, while the containers with more goat milk soap will be lighter, more pastel shades.
Container A: 5 oz. goat milk melt and pour Container B: 5 oz. goat milk melt and pour Container C: 2 oz. goat milk melt and pour + 3 oz. clear melt and pour Container D: .5 oz. goat milk melt and pour + 4.5 oz. clear melt and pour
To container A, add half of the dispersed Neon Blue Raspberry and 1 drop of Liquid Blue. Stir thoroughly and set aside.
o container B, add 10 mini scoops of dispersed Fizzy Lemonade, the remaining dispersed Neon Blue Raspberry and 3 drops of Liquid Yellow. Stir to thoroughly combine.
To container C, add 2 drops Non-Bleeding Teal Liquid, 5 drops Liquid Green, 2 drops Liquid Black and 2 drops Liquid Blue. Stir to thoroughly combine.
To container D, add 6 drops of Liquid Red, 2 drops of Non-Bleeding Cherry Liquid, 2 drops Liquid Yellow and 1 drop Liquid Black. Stir to thoroughly combine.
Using the injector tool, fill in the small details on the gingerbread men, including the lines around the edges, bow-tie, buttons and face. For each gingerbread men, use various colors to make three unique soaps.TIP: When using the injector tool, have a cup of hot soapy water nearby! This allows you to quickly clear out the soap in the injector tool between colors. If you don’t, the soap may harden in the injector tool and clog it.
If necessary, use a Clean Up Tool to clean up any details that may have spilled.
Allow the small details to fully harden and cool. If necessary, reheat the four containers of soap using 5 second bursts until liquid. Once the soap has reached approximately 120-125 degrees, spray all mold cavities with 99% isopropyl or rubbing alcohol and pour each cavity with the various colors of soap. You will have one color left over, set remaining soap aside to use after the hardened soap have been removed.
Spray each cavity with 99% isopropyl or rubbing alcohol to disperse any bubbles. Allow to fully cool and harden. Once hardened, remove soap from the mold, reheat the leftover soap to create one more gingerbread man. Allow to cool and fully harden, and enjoy!
Recipe by Soap Queen at https://www.soapqueen.com/bath-and-body-tutorials/melt-and-pour-soap/gingerbread-man/