Have you seen Bramble Berry’s new Baltic Birch Molds? If not, check them out HERE. I love them SO much. They are stunningly gorgeous, so versatile and selling fast (we’re seriously having trouble keeping them on the shelves). And you can use them for more than just cold process. Here’s a colorful and fun melt and pour project!
Colorants
Before you start: Line your mold with freezer paper making sure that you have a flat bottom with the shiny side up. Remember that the bottom will eventually become the top of your soap. Once your mold is lined, add the side and end border pieces and put your inserts together so they’re ready to go to.
ONE: In a large microwave safe container, melt about 32 ounces of clear soap base. Once the soap is completely melted, add 1 drop of liquid blue colorant to give the soap a “clear” effect (just one drop will do the trick). Do not add any fragrance at this point.
Note: You will only need a couple of ounces for the initial pour so if you don’t have a microwave safe container that big, it’s a-okay. Just melt 1-2 ounces. To save time, I like to melt my soap in larger quantities.
TWO: Pour a thin thin layer into the mold (about 1/8″ thick) and spritz the soap with alcohol while your pouring. This will help the soap spread out into the mold.
THREE: Before the soap cools, quickly place the inserts into the mold, squeezing the ends with your fingers to hold them together. Press the inserts firmly into the soap and let cool for 15-20 minutes, until the clear layer is totally hardened and the dividers are ‘sealed’ in the soap.
Embedding Tips: Spritz the first layer of clear soap with rubbing alcohol and pour another thin layer of clear soap (you might have to remelt your original clear soap). Liberally spritz the embedding object (whether it be soap scraps or toys) with rubbing alcohol and place it into the freshly poured clear soap.
FIVE: Once the embedded layer has cooled, add the final layer of soap with color* and fragrance. I used a combination of Energy Fragrance Oil, Grapefruit Essential Oil and Yuzu Fragrance Oil. I always recommend .25 -.5 ounces of fragrance per 16 ounces of soap base. When pouring your layers, remember to spritz the embedded layer before pouring your colored layer. Also make sure your colored soap is no hotter than 120 degrees; we don’t want to melt any of your other soap layers.
All of my soaps turned out different ranging from 3.2-5.6 ounces (using 89 ounces total) so have fun and make any size that you want!
Unmolding: Place a large cutting board over the top of your mold and gently flip the soap mold over onto a hard surface. Lift the mold off of the soap and slowly remove the freezer paper from the soap. I used the scraper tool from the Tool Kit (a non serrated knife or small spatula would work) to scrape the soap off the edges of the border pieces. Then slowly pull the sides of the mold away from the soap (Note: If you ever use this mold to make Cold Process soap, you cannot pull the sides from the soap as CP soap is softer and tends to tear). Pop out your soaps and marvel at your creativity.